在线一本码道高清

Position: Home > Book Manual > Data Download > Metal Technology > Cold Stamping Automatic Progressive Die Example Collection

Cold Stamping Automatic Progressive Die Example Collection (Part 2)

Bookmark this page
  • Data size: 5.62 MB
  • Data language: Chinese version
  • Document format: PDF document
  • Data Category: Metal Craft
This site recommends:
Related Information:
Related instructions:
  • basic introduction
Cold Stamping Automatic Progressive Die Example Collection (Part 2)
Publication time: 2011 Edition Introduction The author of this book has been engaged in the design of cold stamping progressive dies for 45 years, and has designed many multi-station automatic progressive dies with more characteristics and reference values. "Cold Stamping Automatic Progressive Die Example Collection (Part 2)" introduces, after the first episode, selected 16 examples that have been tested in production practice and have their own characteristics. In addition to the product parts drawings and mold assembly drawings, a complete set of mold parts drawings is also attached to each example. Although these molds are installed on the APA-60 high-precision automatic press, the addition of a feeding mechanism, a material rack, and a rolling equalizer to the ordinary press can also be used. The appendix also provides design information related to the automatic progressive mold . "Cold Stamping Automatic Progressive Die Example Collection (Part 2)" can be used as a reference for cold stamping mold designers and intermediate and advanced mold makers.
Preface to the catalogue The second episode describes the first example of a multi-station automatic progressive die for height adjustment box1
I. Description 1
Second, the height adjustment frame multi-station automatic progressive die assembly Figure 2
Third, the height adjustment frame multi-station automatic progressive die parts Figure 3
1 Die 3
2 female insert 4
3 discharge plate 5
4 Fixing plate 6
5 Baseplate 7
6 T-shaped punch 7
7 long round punch 8
8 Pre-bent punch 8
9 Bending upper mold 8
10 pallet 9
11 Wheel 9
12 Pallet base 9
13 Wedge 10
14 Stop pin 10
15 Top material pin 10
16 Die plate on the shank 11
17 Guide pin 11
18 Stamp Size 11
19 Cutting die 12
20 steel stamp 12
Second example of automatic progressive die for angle frame with bending angle less than 90 ° 13
I. Description 13
Second, the angle of less than 90 ° angle bracket automatic progressive die assembly Figure 14
Three, the angle of less than 90 ° angle frame automatic progressive die parts Figure 15
1 female 15
2 long round punch, small round punch 16
3 scrap knives 16
4 discharge plate 17
5 Mould on template 18
6 T-shaped punch 18
7 Stop pin 18
8 Fixing plate 19
9 Pre-bent punch 20
10 bending punch 20

The third example of moving contact automatic progressive die 21
I. Description 21
Second, the moving contact automatic progressive die assembly Figure 22
Third, the moving contact automatic progressive die parts Figure 23
1 Die 23
2 Fixing plate 24
3 discharge plate 25
4 forming the lower mold 26
5 Die Handle Combination 27
6 Roller seat 27
7 Roller 27
8 universal hair dryer 28
9 Carbide inserts, forming die 28
10 Stopper pin 28
11 Top pin 29
12 Return pin 29
13 Top plate 29
14 Positioning block 29
15 Top material combination 30
16 embossed punch 30

Fourth example of cap continuous drawing automatic progressive die 31
I. Description 31
Second, cap continuous drawing automatic progressive die assembly Figure 32
Third, the cap continuous drawing automatic progressive die parts Figure 33
1 female 33
2 Fixing plate 34
3 Holder 35
4 profiled punch 36
5 Waste knife 36
6 Blanking punch 36
7 Guide pin 36
8 Die set 37
9 guide sleeve 37
10 Drawn punch (1) 37
11 Drawn punch (2) 37
12 Top material block (1) 38
13 Top material block (2) 38
14 Skateboard 38
15 Top material pin 38
16 Stop pin 38
17 Die Handle Set 39

Fifth example of hook-shaped piece one out two automatic progressive die 40
I. Description 40
Second, the hook piece one out two automatic progressive die assembly Figure 41
Third, the hook piece one out two automatic progressive die parts Figure 43
1 Die 43
2 discharge plate 44
3 Fixing plate 45
4 Hook punch 46
5 T-shaped punch 46
6 Long punch 46
7 Stop pin 46
8 Right cushion die 47
9 Left cushion die 47
10 Template assembly on the mold handle Figure 48
11 Roller seat 48
12 Roller 48

Sixth example of automatic progressive die for clip punching and blanking 49
I. Description 49
Second, the clamping die punching blanking automatic progressive die assembly drawing 50
三 、 Parts of automatic progressive die for clip punching and blanking Figure 51
1 Die 51
2 discharge plate 52
3 Fixing plate 53
4 small punch 54
5 large punch 54
6 Top plate 54
7 punch punch 54
8 Top material combination 55
9 Base 55
10 Mould upper template 56

Seventh example of small rivet automatic progressive die 57
I. Description 57
Second, the small rivet automatic progressive die assembly Figure 58
Third, small rivet automatic progressive die parts Figure 60
1 wire clamping block 60
2 Cutter slide (left) 60
3 Cutter slide (right) 61
4 Wire feeder 62
5 wire backstop 63
6 rivet head 64
7 Left and right slide rails 64
8 wire bracket 65
9 Limit screw bracket (1) 65
10 Limit screw bracket (2) 65
11 rivet head slide 66
12 Backstop (1) 66
13 Roller seat 66
14 Roller 66
15 Cutter Combination 67
16 Oblique wedge (1) 68
17 Wedge (2) 68
18 Upper fixing plate 69

Eighth example washer one out of nine automatic progressive die 70
I. Description 70
Second, the gasket one out of nine automatic progressive die assembly Figure 71
Three, washer one out of nine automatic progressive die parts Figure 72
1 Die 72
2 Discharge die 73
3 Mounting plate 74
4 Blanking punch 75
5 Guide pin 75
6 Stopper pin 75
7 Scrap knife 75
8 Roller seat 76
9 Wheel 76
10 Mould upper template 76

The ninth example of the spring leaf one out four, less waste automatic progressive die 77
I. Description 77
Two, one spring leaf, four, less waste, automatic progressive die assembly Figure 78
Three, one spring leaf, four, less waste, automatic progressive die parts Figure 79
1 Die 79
2 discharge plate 80
3 Fixing plate 80
4 Side Blades 81
5 Punch 81
6 Stop pin 82
7 Top material pin 82
8 Mould upper template 83
9 roller seat 83
10 Wheel 84
11 universal blow nozzle 84

The tenth example of two-story concave mold bracket automatic progressive mold 85
I. Description 85
Automatic progressive die assembly for two or two-story female die support Figure 86
Three-story two-story concave die bracket automatic progressive die parts Figure 88
1 Die 88
2 discharge plate 89
3 Upper fixing plate 90
4 Lower fixing plate 91
5 Blanking punch 92
6 long round punch 92
7 Robot 93
8 wedge 94
9 roller seat 94
10 Wheel 95
11 Top material combination 95
12 Bending lower mold block 96
13 Spring core pumping 96
14 Stopper pin 96
15 Bend lower mold 97
16 Top block 97
17 Guide roller seat 98
18 Guide roller 98
19 Left and right slide rails 98
20 Limit stop 99
21 on template combination 99
22 bending punch 100
23 Return pin 100
24 Spring bezel 101

Eleventh example of continuous automatic die 102
I. Description 102
Second, the automatic assembly progressive die assembly picture 103
Third, the continuous plate automatic progressive die parts diagram 104
1 Die 104
2 discharge plate 105
3 Fixing plate 106
4 square punch 107
5 Cut the punch 107
6 round punch 107
7 Stop pin 108
8 Roller Seat 108
9 Wheel 109
10 Mould upper template 109

Twelfth Terminal Block Double Side Blade Automatic Progressive Die 110
I. Description 110
Second, the terminal block double side edge automatic progressive die assembly drawing 111
Third, the terminal block double side edge automatic progressive die layout 112
Fourth, the terminal block double side edge automatic progressive die parts Figure 113
1 Die 113
2 Positioning block 114
3 Stopper pin 114
4 Beater 114
5 Guide pin 114
6 discharge plate 115
7 Long punch 116
8 Bending upper mold 116
9 Fixing plate 117
10 Cut off punch 118
11 Side edge punch 118
12 Die Handle Combination 119

Thirteenth example of U-shaped piece punching, cutting and bending automatic progressive die 120
I. Description 120
Second, U-shaped parts punching, cutting, bending automatic progressive die assembly picture 121
Three, U-shaped parts punching, cutting, bending automatic progressive die parts Figure 123
1 punching die 123
2 Bend lower mold 124
3 Stop block 124
4 Fixing plate 125
5 Handle 126
6 round punch 126
7 Guide plate 127
8 Stopper pin 127
9 Bending upper die 128
10 ejector rod 128
11 Pusher 129
12 Left and right slide rails 129
13 spring core shaft 130
14 Limit stop 130
15 wedge 131
16 Left and right manipulators 131
17 Spring bezel 132
18 Roller seat 132
19 Wheel 133

Fourteenth example of automatic progressive die for punching, cutting and bending 134
I. Description 134
Second, punching, cutting, bending automatic progressive die assembly drawing 135
Three, punching, cutting, bending automatic progressive die parts Figure 136
1 profiled punch 136
2 Die 137
3 Mounting plate 138
4 discharge plate 139
5 Stop block 140
6 Bending upper mold 140
7 large guide pins 140
8 Small guide pin 140
9 small round punch 141
10 large round punch 141
11 Roller seat 141
12 Guide roller 142
13 Stopper pin 142
14 Die Handle Combination 142

Fifteenth Hexagonal Washer Automatic Progressive Die with Less Waste 143
I. Description 143
Second, hexagonal washer less waste automatic progressive die assembly drawing 144
Three, hexagonal washer less waste automatic progressive die parts Figure 145
1 Die 145
2 discharge plate 146
3 Mounting plate 147
4 Hexagon punch 148
5 Round punch 148
6 Stop pin 148
7 Waste knife 149
8 double hole funnel 149
9 single-hole funnel 149
10 Die Handle Combination 150

Sixteenth Example Hook-shaped Automatic Progressive Die 151
I. Description 151
Assembly Diagram of Automatic Progressive Die for Hook-shaped Parts
Third, the hook piece automatic progressive die parts Figure 154
1 Die 154
2 discharge plate 155
3 Mounting plate 156
4 Top material pin 157
5 forming lower mold 157
6 Guide pin 157
7 forming upper mold 157
8 cutter 158
9 Stop pin 158
10 profiled punch 158
11 round punch 158
12 Scrap Knife 159
13 Long punch 159
14 Die Handle Set 159
Appendix Design Information of Blanking, Bending, Drawing, and Forming Related to Automatic Progressive Dies and Selection of Cold Die Types 160

冷冲压自动级进模实例专集(第二集) Download the special case of cold stamping automatic progressive die (part 2)

Download Ranking

Latest information