Question for help: When I opened AutoCAD, the size of the graphics on the screen was less than 1/10 of the actual size. And the marked dimension numbers are very small, the small is mixed with the dimension line and can hardly be seen. The centerline also looks exactly like the solid line. Graphics
The cad scale can change the size of the scale by setting the scale factor. This is generally used to modify the scale of linear scales. For example, when the scaling factor in the dimension is doubled, the original 100mm line segment will have a dimension of 20
This article mainly addresses
When the above activation failure prompt appears, please confirm the following: 1. Have you closed the anti-virus software (such as 360, Kingsoft, etc.) 2. Have you used the registration machine corresponding to your system (32-bit system must use 32 registration machine, 64 Must use a 64-bit register) 3. Yes
Autocad installation is complete and some products cannot be installed
Q: You need to apply patch when licence screen appears wrong when installing the software
Xiao Bian today brings you the installation tutorial of AutoCAD 2012 Chinese version. After some testing, the software has been successfully installed.
Proteus Pro 7.8 sp2 Chinese version free version, the Proteus Chinese version free version solves the problem that the 7.2 version is automatically closed after 10 minutes of running, and is currently the highest version in Protus.
Xiao Bian today brings you the installation tutorial of AutoCAD 2012 Chinese version, after some testing has been ...